Ruesch Model:  146 

Type:                         Steel, Stainless Steel and Copper Alloys 

Stock Width:                  24" (609.6mm) (25" untrimmed - 635mm) 

Coil O.D.:                    Maximum 60" (1524mm) 

Entry Coil I.D.:              16" - 20" (406mm - 508mm) 

Exit Coil I.D.:               16" and 20" (406mm and 508mm) 

Coil Weight:                  6,000 lbs. (2720 kg) 

Stock Thickness - Maximum:    

 As per Catalog:              0.125" (3.175mm) 

 As per Original Order:       0.080" (2.0mm) 

 As Used - Maximum:           0.093" (2.36mm) 

 As Used - Minimum:           0.015" (0.3mm) 

Direction of Travel:          Right to Left

Line Speed based on Recoiler Motor:

 at 890 RPM:  112/420 FPM (34/128 M/Min.) 

 at 1775 RPM:  225/844 FPM (68/257 M/Min.) 

Consisting of the following:

-Uncoiler:

  Hydraulic Link-Type Expansion

  Mandrel Expansion:  16" - 20" (406.4 - 508mm) 

  Mandrel Width:  28" (711.2mm) 

  Non-Driven 

  Back Tension:  Wichita Air Clutch 

  Air Controls:  Numatics Worldwide 

  Brake Cooling System:  Champion Blower Size 1-3/4FC 

  Passline: 35" from Floor to the center of the Mandrel

  Overall Size: 92" L x 66" W x 51" High

-Slitter Head: 

  Steel Stripper Ring Assembly

  Single Entry Billy Roll:  3.250" (82mm) Dia. x 27" (685mm) 

  Entry Strip Holddown with Side Guides:  Manual Adjustment 

  Arbor Size:  4.125" (105mm) Dia. x 27" (685mm) Face Width 

  Slitter Head Adjustment:  Handwheel on both sides 

  Exit Passline Roll

  Threading Motor:  3 HP Louis Allis AC, 1760 RPM, 208-220/440 Volt, 9/4.5 Amps,

  Right Angle Reducer with 100:1 ratio 

  Warner Electric Clutch-Brake Current Control, Model CBC-200

  Pushbutton Controls

  Spacer O.D.:  6.125" (155mm) 

  Knife O.D.:  7" (178mm) Maximum, 6" (152mm) Minimum

  Ring:  7.250" (184mm) O.D. x 6.250" (159mm) I.D. 

  Includes Wooden Stripper Fingers

  Passline: 40"

  Overall Size: 105" L x 48" W x 62" High

-Scrap Winder:

  Maximum Traverse:  8" (203mm) 

  Coil I.D.:  12" (304.8mm) 

  Maximum Coil O.D.:  24" (610mm) 

  Drive Motor:  5/2.5 HP AC, 1740/870 RPM, 460 V, 9.2 Amps,

   3 Phase/60 HZ, Louis Allis 

  Gearbox: Louis Allis s/N 1W-30540, Input RPM 1750, Output RPM 155, 

   Ratio 11.4:1 

  Oscillate Wind

  Overall Size: 48" L x 28" W x 36" High

-Recoiler:  Ruesch 

  Type:  Expanding Mandrel 

  Drum Size:  16" (406.4mm) Dia. x 30" (762mm) Face Width 

  Bolt-On Pads for 20" Dia. (508mm)

  Type of Expansion:  Hydraulic 

  Material Slot, No Gripper

  Coil Pushoff:  Hydraulic 

  Separator Plates 

  Horsburgh & Scott Main Gearbox with 32.4:1 ratio

  Drive Motor:  50/25 HP, Louis Allis, 890/1775 RPM, 440 V, 64/43 AMPS, 3 PH, 60 HZ,

   Type C0GMX, S/N:  3274629001 with Wichita Slip Clutch for Acceleration Control

   and Timing Belt Drive.

  Air Holding Brake: Louis Allis Magnetic Model 1-042-031-1, Torque 230 ft.

   440 Volt, 3 PH, S/N:  B-386-463

  Passline: 40" from Floor to center of Drum

  Overall Size: 106" L x 60" W x 62" High

-Turnstile:

  No. of Arms:  2 

  Arm Size:  8" (203.2mm) Dia. x 39" (990mm) Face 

  Manual Rotation 

  Passline: 49" from Floor to top of Arm

  Base Plate: 36" x 36"

  Overall Size: 98" L x 36" W x 53" High

-Hydraulic Unit:

  Drive:  7.50 HP AC, 1180 RPM, 9.2 Amps, 3 PH, 60 Hz.

  Oil Temperature Gauge 

  Oil Reservoir:  Approx. 40 Gallon Capacity 

  Accumulator

  Overall Size: 48" L x 34" W x 33" High

-Large Quantity of Tooling 

-Spare 16" Dia. Drum for Recoiler